Dust returns days after the final clean
Fine particulate stays airborne and resettles on every surface, so a one-pass clean looks finished and then does not.
Serving Providence, Rhode Island & surrounding areas
Construction dust is fine enough to stay airborne for days, so a single clean simply relocates it. We work in stages, letting the air clear between passes.
Multi-stage process • Works to your handover date • Free walkthrough
These are the specific failures that bring facilities to us, rather than a general wish for a cleaner building.
Fine particulate stays airborne and resettles on every surface, so a one-pass clean looks finished and then does not.
A space that is not genuinely ready delays occupancy, and that delay costs far more than the cleaning did.
Trades remove their debris. That is not the detailed work a space needs before anyone occupies it.
Adhesive, paint, and grout haze removed with the wrong method scratches the glass and fixtures you just paid for.
Construction particulate pulled into a new system clogs filters fast and pushes dust back into the space.
Your written scope states exactly what happens and how often, so nothing depends on memory or goodwill.
What actually changes for your business, measured in outcomes rather than effort.
A genuinely finished space means no delay between construction sign-off and use.
Staged cleaning with settling time between passes is what actually ends the recurring dust.
Correct methods for each surface protect the glass, fixtures, and flooring you just installed.
Cleaning vents and diffusers before occupancy protects the new system and the air in the space.
A punch-list walkthrough gives you a clear record of condition at the point of transfer.
Five steps that remove the guesswork, because most cleaning relationships fail when nothing was written down.
We walk your facility, note the problems you have been living with, and scope the post-construction cleaning against what is actually there.
You receive a written scope and frequency, so what was agreed is what gets done in month six.
A consistent crew works to your schedule, around your hours, so nothing stops for cleaning.
Supervisors inspect against the checklist instead of waiting for you to find a problem.
You have a direct contact who answers, and any miss is corrected and written into the scope.
The facilities where this service solves the most pressing problem.
Tenants expect a genuinely clean space on day one, not one that still needs work.
An opening date cannot move, so the cleaning has to be finished and verified before it.
Clinical spaces need dust fully removed before equipment installation and first use.
Kitchens must be inspection-ready, which means construction residue cleared from every surface.
Dust control protects the tenants who are still working around the project.
A clean, documented space leases faster and avoids condition disputes.
Pricing for post-construction cleaning is built around your facility, not a published rate card. A flat number applied to a building nobody has seen is how surprise fees start. The figure you approve is the figure you are invoiced.
Request Your Free QuoteTransparent pricing • No hidden fees • No long-term contracts required
Square footage, number of restrooms and breakrooms, and how many separate areas need covering.
Daily, several times a week, weekly, or periodic. Higher frequency costs more monthly but holds standards steadier.
A busy public-facing space and a quiet suite of identical size do not need the same plan.
Access rules, compliance documentation, and any specialized work within post-construction cleaning are priced as defined additions.
Usually in two or three stages: a rough clean once major trades finish, a detail clean after final installations, and a settling pass shortly before occupancy. Booking all of it up front is what protects your handover date.
Construction dust is far finer and more pervasive than ordinary dust, and new surfaces carry adhesive, paint, and haze that need specific removal methods. It needs HEPA filtration and staged passes, not a standard visit.
We remove remaining debris, packaging, and material left in the space. Large-scale demolition waste and dumpster hauling stay with the general contractor, and we will confirm that boundary before starting.
Yes, though the detail clean should follow final installations. Cleaning before trades finish means paying to clean the same surfaces twice.
Rarely, and anyone promising it has not accounted for settling. Fine dust needs time to fall out of the air, which is exactly why we include a later pass.
Tell us your handover date and construction stage. We will scope the passes needed and give you a firm price.
Free assessment • Fast response • No obligation
Tell us about your facility and what is not working. We will scope the post-construction cleaning you actually need and give you a firm price, with no obligation.
Free assessment • Response within 24 hours • No obligation
Prefer to talk? Call (401) 406-8355.